 |
Longcroft Engineering Ltd.
Bridge Mill, Gauxholme Fold
Todmorden, Lancs
OL14 7PW
Tel: 01706 819955
Fax: 01706 819966
|
|
|
|
|
|
|
Clock Springs
The production of quality clock springs is a specialised area in which few spring manufacturers are equipped to compete. Longcroft Engineering have particular talent and experience in this field and can produce clock springs to suit your exact requirements.
Our clock springs are usually produced from pre-hardened materials but where sharp bends are required we use annealed spring steel which is then heat treated to achieve the optimum material properties required.
We have in stock a large amount of dressed edged materials especially for clock springs and can offer assembly of associated parts.
We are pleased to satisfy all your clock spring requirements from the production of prototype quantities through to low, medium and high volume production.
|
Material Size Range
0.004” to 0.104” inch Thick
0.1 mm to 2.64 mm Thick |
|
Materials for Clock Springs
A large variety of materials are in stock:
Carbon Spring Steels |
Stainless Steel 302, 304 & 316 |
Beryllium Copper |
Phosphor Bronze |
|
Please do not hesitate to call us for help in specifying your clock springs. We have many years of experience and are always more than happy to help.
|
|
|
|
|
|
